該設備采用水平臥式鋁型材結構，由進料段·預洗滾刷段·普通自來水水滾刷段·去離子水滾刷段·風刀干燥段·出料段·風機箱和電控柜等組成。 

The equipment adopts a horizontal aluminum profile structure, consisting of a feeding section, a pre washing rolling brush section, a regular tap water rolling brush section, a deionized water rolling brush section, an air knife drying section, a discharge section, a fan box, and an electrical control cabinet.

主要部分材料： 

1）傳輸膠輥采用全硫化丁晴橡膠輥（灰色），軸頭采用 不銹鋼材料。 

2）與水接觸的鈑金全部采用 SUS201 不銹鋼材質。護罩類鈑金采用 SUS201 不銹鋼材質。 

3）所有的噴淋水管采用 SUS201 不銹鋼材質，采用扣式噴嘴。 

4）機架部分采用標準型材焊接和鋁型材組裝式而成。

Main materials:

1) The transmission rubber roller adopts fully vulcanized nitrile rubber roller (gray), and the shaft head is made of stainless steel material.

2) All sheet metal in contact with water is made of SUS201 stainless steel material. The shield type sheet metal is made of SUS201 stainless steel material.

3) All sprinkler pipes are made of SUS201 stainless steel material and use buckle type nozzles.

4) The rack is welded with standard profiles and assembled with aluminum profiles.

風機干燥段 

A 風干段設計合理，風機箱架在風箱架上，不占用場地。箱體 

上下部均設有消音材料，噪音小，可改善工作環境；（1.5 米距離測量 80 分貝以內） 

B▲共設計有 3 對直風刀 

C▲風機進風口配有兩道過濾網，粗過濾（精度 F5）和中效過濾網（精度 F7) 

Fan drying section

The design of the air drying section A is reasonable, and the fan box is mounted on the air box frame, without occupying the site. Box

The upper and lower parts are equipped with sound-absorbing materials, which reduce noise and improve the working environment; (Within 80 decibels measured at a distance of 1.5 meters)

B ▲ Designed with 3 pairs of straight air knives

The air inlet of the C ▲ fan is equipped with two filter screens, coarse filter (accuracy F5) and medium efficiency filter (accuracy F7)

結構部分特點： 

1）進料段 

A 設計有噴淋 

B 有 1 個獨立的噴淋水箱 

2）輥刷清洗段 

A 滾刷清洗段和風干干燥段上部可整體電動升降，操作簡單， 方便設備的維護，保養和檢修。配有高強度螺桿，升降高度可達 300MM. 

B 設計共有 3 對毛刷，毛絲直徑為 0.25MM,毛刷直徑為 160MM, 不銹鋼軸頭。上·下毛刷獨立電機帶動，皮帶傳動。 

C 第 3 對輥刷后設計有干水風刀。保證清洗的效果。 

D ▲輥刷清洗段共設計有 3 個的水箱可獨立可串聯。

    ▲水箱回流水都裝有過濾網、水泵使用快拆接頭。

Structural characteristics:

1) Feed section

Design A with spray

B has 1 independent spray water tank

2) Roller brush cleaning section

The upper part of the A rolling brush cleaning section and the air drying section can be electrically lifted as a whole, which is simple to operate and convenient for equipment maintenance, upkeep, and repair. Equipped with high-strength screws, the lifting height can reach 300MM

Design B has a total of 3 pairs of bristles, with a diameter of 0.25mm and a diameter of 160mm, with a stainless steel shaft head. The upper and lower brushes are driven by independent motors and driven by belts.

The third pair of rollers in C is designed with a dry water air knife after brushing. Ensure the effectiveness of cleaning.

The D ▲ roller brush cleaning section is designed with three water tanks that can be independently connected in series.

The return water of the water tank is equipped with a filter screen, and the water pump uses a quick disconnect joint.

電氣控制： 

設備中的電機·風機·水泵·傳輸·照明·升降等操作都由控制柜控制，PLC 操控。主傳動采用變頻器調速，清洗厚度由編碼器測量。

Electrical control:

The motor, fan, water pump, transmission, lighting, lifting and other operations in the equipment are all controlled by the control cabinet and controlled by PLC. The main drive adopts a frequency converter for speed regulation, and the cleaning thickness is measured by an encoder.